Here are some of our spare parts:
| 5590000670 |
BELT |
|
Maintenance parts |
| 3222306266 |
RELIEF CRTDGE |
0.185 |
Hydraulic components |
| 5540169200 |
CARTRIDGE |
0.22 |
Hydraulic components |
| 56046885 |
MOTOR |
13.95 |
engine |
| BG01511948 |
MOTOR |
13.95 |
engine |
| 9106160727 |
CHECK VALVE |
0.08 |
Hydraulic components |
| 516995 |
SEAL ,RUBBER |
|
Machined parts |
| 516996 |
SEAL ,RUBBER |
|
Machined parts |
| 55215618 |
SEAL ,RUBBER |
0.96 |
Machined parts |
| 3222311156 |
MOTOR |
30 |
Hydraulic components |
| BT00015075 |
FILTER |
1 |
Maintenance parts |
| 55010071 |
JOYSTICK |
0.73 |
Electrical components |
| 55166754 |
GASKET PLATE |
0.001 |
Machined parts |
| BG00565968 |
REPAIR KIT |
1.09 |
Hydraulic components |
| 56021212 |
DIRECTIONAL VALVE |
0.147 |
Hydraulic components |
| 56210329 |
CARTRIDGE |
0.2 |
Hydraulic components |
| 55010069 |
JOYSTICK |
0.57 |
Electrical components |
| 5561152300 |
WEARING RING |
1.4 |
Machined parts |
| 5580010293 |
SENSOR |
0.03 |
Electrical components |
| 5580006636 |
SENSOR |
0.02 |
Electrical components |
| 6060002342 |
SENSOR |
0.01 |
Electrical components |
| 5580006633 |
SENSOR |
0.03 |
Electrical components |
| 5580010294 |
FUEL PUMP |
17 |
engine |
| 5580013617 |
INJECTOR |
0.68 |
engine |
| 5535561900 |
BEARING |
4.3 |
Hardware |
| 5574310000 |
WHEEL ASSY |
218 |
Machined parts |
| 5590001163 |
COOLER |
20 |
Hydraulic components |
| 5590016523 |
GEAR PUMP |
14 |
Hydraulic components |
| 5590017593 |
GEAR PUMP |
12.6 |
Hydraulic components |
| 6060004659 |
SERVICE KIT |
0.14 |
Hardware |
| 6060011681 |
STARTER |
8.6 |
engine |
| 6060004335 |
CARDAN U-JOINT |
2.9 |
driving medium |
| 56017744 |
DOUBLE PUMP |
58.2 |
Hydraulic components |
| 56209526 |
TURBOCHARGER |
|
engine |
| 56045592 |
GENERATOR PULLEY |
|
engine |
| 56209543 |
ROLLER |
|
engine |
| 56208799 |
BELT PULLEY |
0.61 |
engine |
| 56048132 |
CIRCULAR PUMP |
|
Hydraulic components |
| 56207524 |
DIFFERENTIAL & CARRIER ASSEMBLY |
237 |
driving medium |
| BG00275945 |
HYDRAULIC PUMP |
|
Hydraulic components |
| 56204680 |
BEARING SUPPORT |
|
engine |
| 55026498 |
CONTROL BLOCK ASSEMBLY |
4.8 |
Hydraulic components |
| 77009694 |
GEAR PUMP |
7.1 |
Hydraulic components |
| 55084176 |
REGULATOR |
1.06 |
Hydraulic components |
| 87193339 |
OVER CENTER VALVE |
0.16 |
阀芯 |
| 88219569 |
COIL |
1.02 |
Electrical components |
| 55155435 |
FAN |
0.8 |
Electrical components |
| 77009391 |
STARTER |
10.81 |
engine |
| 70900057 |
RAIL |
22.3 |
Machined parts |
| 64592100 |
PUMP,PISTON |
39 |
Hydraulic components |
| BG01054120 |
HYDRAULIC PUMP,AXIAL PISTON,DOUB |
45 |
Hydraulic components |
| BG00340692 |
PUMP |
|
Hydraulic components |
| 3222309964 |
PUMP |
|
Hydraulic components |
| 2657110157 |
PUMP |
|
Hydraulic components |
| 2651161602 |
COUPLING |
1.4 |
driving medium |
| 2657799322 |
PUMP |
|
Hydraulic components |
| 3217920310 |
Rotary group |
4.8 |
Hydraulic components |
| 3217920311 |
Rotary group |
4.5 |
Hydraulic components |
| 2657553935 |
PUMP |
|
Hydraulic components |
| 2658268801 |
PUMP |
|
Hydraulic components |
| 2658607549 |
PUMP |
|
Hydraulic components |
| 2658607563 |
PUMP |
|
Hydraulic components |
| 2658607696 |
PUMP |
|
Hydraulic components |
| 3222182480 |
MOTOR |
50.5 |
Hydraulic components |
| 3222305404 |
PUMP |
|
Hydraulic components |
| 86265048 |
SCREW |
0.2 |
rock drill |
| 86511490 |
BUSHING |
1.5 |
rock drill |
| 0147136503 |
BOLT |
|
Hardware |
| 3719011302 |
PUMP |
|
Hydraulic components |
| 5726804879 |
BELT |
0.185 |
Maintenance parts |
| 5580104590 |
PUMP |
22.8 |
Hydraulic components |
| 5726800469 |
BELT |
22.8 |
Maintenance parts |
| 2658608025 |
PUMP |
|
Hydraulic components |
| BG01070583 |
O-ring |
0.001 |
Sealing element |
| 56049465 |
BELT |
|
Maintenance parts |
| BG00646591 |
HLX5 BOLT KIT |
4.8 |
rock drill |
| BG00550198 |
HLX5 ROTATION KIT |
15.82 |
rock drill |
| BG00689664 |
HL710 FLUSHING KIT |
7.35 |
rock drill |
| BG00800262 |
HL820/HF820 D45 FLUSHING KIT |
6.91 |
rock drill |
| BG00662417 |
HL DRIFTER BOLT KIT |
5.705 |
rock drill |
| BG00581863 |
HL710 ROTATION KIT |
28.2 |
rock drill |
| BG00581862 |
HL710 PERCUSSION KIT |
13.6 |
rock drill |
| 86959329 |
SEAL KIT |
0.03 |
rock drill |
| BG01194659 |
FITTING KIT FLUSHING HEAD D45 AIR |
|
rock drill |
| BG01194661 |
FITTING KIT BODY HL510/HL510S |
2.3 |
rock drill |
| BG00580622 |
HL510 ROTATION KIT |
9.6 |
rock drill |
| BG00728045 |
HL510 D45 FLUSHING KIT |
3.2 |
rock drill |
| BG01207454 |
ROCKDRILL MOUNTING KIT HL510/HL510 |
2.46 |
rock drill |
| BG00550200 |
HL510B PERCUSSION KIT |
11.8 |
rock drill |
| AF00101657 |
HEX.BOLT |
0.55 |
rock drill |
| 88563169 |
SEAL KIT |
0.22 |
rock drill |
| 15060148 |
BOLT |
0.35 |
rock drill |
| BG00663352 |
HL510 BOLT KIT |
5.22 |
rock drill |
| 55035876 |
ROTATION BUSHING |
12.174 |
rock drill |
| 15252028 |
FRONT BUSHING |
0.495 |
rock drill |
| 00753800 |
PIN |
0 |
Machined parts |
| 88494839 |
FILTER, FUEL |
1.38 |
filter |
| 88524039 |
SWITCH, LOW PRESSURE |
0.06 |
filter |
| 88524169 |
CONNECTOR, PRE-WIRED |
0.015 |
filter |
| 88543089 |
SEAL KIT |
0.2 |
filter |
About us:
Established in 2011, JUNTAI is a company dedicated to making and selling after-market spare parts for Sandvik and Epiroc mining engineering machineries. Its parent company, Jinjiang Wantai, was established in 1989, with a plant area of 10,000
㎡, and its products have passed the ISO9001:2015 quality system certification. Yunnan Wantai, a subsidiary of the parent company, is one of the largest companies selling drilling rigs in southwest China.
Our Clients:
Power Construction Corporation of China, China Energy Engineering Corporation Ltd. China Railway Construction Corporation Ltd. Jinchuan Group Co., Ltd. Pangang Group Company Ltd. China Railway Tunnel Bureau Group Co., Ltd. China Wuyi Co., Ltd. CGC Overseas Construction Group Co., Ltd. Yunnan Phosphate Chemical Group Co., Ltd. Yunnan Tin Group Co., Ltd. Yunnan Copper Industry (Group) Co., Ltd. Yuxi Yukun Iron and Steel Co., Ltd. Yunnan Hualian Zinc& Indium Stock Co., Ltd. China Anneng Construction Group Co., Ltd.
Why Choose JunTai Machinery:
1.Industrial Experience
With 30 years of experience in making and selling construction machinery, the company has built a great client base and excellent reputation throughout China, and sold products to many foreign countries and regions.
2.Quality Assurance
All of our products are subject to strict testing and real machine inspection to ensure that all sold products could work as along as the service lives warrantied by original manufacturers.
3.Fast Delivery
We have large-scaled spare part warehouses in Fujian and Yunnan with comprehensive stocks to ensure timely delivery.
FAQS:
What are the main products of your company?
Spare parts for Epiroc and Sandvik machine, spare parts for drilling rigs, drilling jumbo, scrapers, the kinds of spare parts include JUNTAI (self-produced products), substitution (made in China or import from abroad), OEM (original equipment manufacturer).
What to offer for inquiry
?
Please provide part number and actual demand quantity for inquiry. If the description is different with the part number, the part number prevails.
How long does our price valid?
Price lists are only valid for 30 days, follow the principle of priority sales.
Does this price include the duty
？
All prices are exclusive of 13% VAT and other taxes or official duties.
What about the terms of payment
？
30% advance payment, full payment before delivery.
What about the typically delivery time?
We have spare part stocks in our warehouses, which can be shipped on each working day. In case no ready products available at warehouses, we can prepare for delivery after receiving 30% deposit. After receiving the prepared products at warehouse, the shipment could be arranged on the closest business day immediately. The delivery may be ahead of schedule or delayed due to inventories of raw materials or the number of orders.